Fan
Cables
Breakers and Switches
Decor
Cabinets
Locks
Shades
Solution
LED Lights
Outdoors Lighting
Flood Light
Bonds
Ressichem Bond TA-210
₨ 530.00 / BAG
Ressichem Bond is an extremely versatile tile adhesive for the internal and external applications, swimming pools, basements etc. Ressichem Bond is highly suitable for the bonding of most types of tiles. Ressichem Bond is highly suitable for the application of porcelain, marble, granite, ceramic, glass tiles and many other different types of tiles in dry and wet areas. Ressichem Bond can easily be applied using the application spectrum as defined by BS EN 5385-1.
- Weight: 20KG
- Benefit: Rapid setting high early strength
- Color: Grey
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Ressichem Bond TA-220
₨ 1,050.00 / BAG
Ressi TA 220 White is a dry premix ready to use white cement based general purpose tile adhesive which can be used for standard tile bonding application for internal and external floor and wall tiling. Ressi TA 220 White is an ideal tile adhesive for installing mosaic, ceramic, and other general homogenous tiles where a white non yellowing base tile adhesive is required. Ressi TA 220 White can easily be applied using the application spectrum as defined by BS EN 5385-1.
- Weight: 20KG
- Benefit: Rapid setting high early strength
- Color: Grey
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Ressichem Bond TA-230
₨ 1,700.00 / BAG
Ressi TA 230 White is an extremely versatile tile adhesive for the internal and external applications, swimming pools, basements etc. Ressi TA 230 White is highly suitable for the bonding of most types of tiles. Ressi TA 230 White is highly suitable for the application of porcelain, marble, granite, ceramic, glass tiles and many other different types of tiles in dry and wet areas. Ressi TA 230 White can easily be applied using the application spectrum as defined by BS EN 5385-1
- Weight: 20KG
- Benefit: Rapid setting high early strength
- Color: White
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Sea Star Tile Adhesive Flex – C 1
₨ 1,320.00 – ₨ 1,580.00 / BAG
MULTI–FLEX is ideal for fixing all types of ceramic tile and stone to solid surfaces, heated sub-floors, and 15mm ply-wood overlay. It is a fast-setting grey or white adhesive and allows grouting to proceed 3 hours after it sets to a fully water-resistant high early strength bond suitable for interior/exterior use and locations that are frequently wet
- Weight: 20KG
- Benefit: Rapid setting of high early strength
- Color: Grey , White
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Sea Star Tile Adhesive Flex – C 2
₨ 2,420.00 / BAG
MULTI–FLEX is ideal for fixing all types of ceramic tile and stone to solid surfaces, heated sub-floors, and 15mm ply-wood overlay. It is a fast-setting grey or white adhesive and allows grouting to proceed 3 hours after it sets to a fully water-resistant high early strength bond suitable for interior/exterior use and locations that are frequently wet
- Weight: 20KG
- Benefit: Rapid setting of high early strength
- Color: White
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Sea Star Tile Adhesive Multifix Premium
/ KG
TYPICAL PROPERTIES
- Colors : Grey
- Density: 6–8 kg/m²
- Yield: A 20kg bag mixed with 4-5Â liters of water yields 15.5 liters of mixed adhesive.
- Toxicity: MULTIFIX–STA300 is non-toxic after cure and can be safely used in conjunction with potable water.
TYPICAL APPLICATIONS
- MULTIFIX- PREMIUM: tile adhesive is suitable for variety of substrates including concrete, cement sand screeds, concrete block wall and low porosity surfaces.
- MULTIFIX – PREMIUM: may be used in areas where floor tiling is likely to be exposed to sunlight and rain. It is especially suitable for fixing WALL tiles in interiors only.
Shabbir Tile Bond (20KG)
₨ 610.00 / BAG
Stile Bond is a high performance cementitious mortar to be mixed with water or Latex 73 to fix ceramic tile, porcelain tile and natural stone, using thin-set method of installation.
- Weight: 20KG
- Benefit: Rapid setting high early strength
- Color: Grey
- Usage: Ideal for fixing all types of ceramic tile and stone
- Unit Cost: Available Per Bag
Sea Star Grouting Unsanded
₨ 180.00 – ₨ 850.00 / Kg
ine, Water Resistant, Polymer Modified, Cement-based Non-Shrink Grout. Suitable for Grouting all types of Tiles, Swimming Pool Tiles, Decorative Stones, and marbles.
SEA STAR TILE GROUT (UNSANDED) is a fine, colored powder which, when mixed with water gives a smooth, easily applied creamy paste for clean grouting of tiles. It sets a decorative water-resistant finish.
SEA STAR TILE GROUT (UNSANDED) is resistant to cracking in joints upto 3-5mm wide in the hardened state.
Sea Star Tile Adhesive Multifix
₨ 520.00 – ₨ 870.00 / KG
TYPICAL PROPERTIES
- Colors : Off-white and Grey
- Density: 1.1kg/m³
- Yield:Â A 20kg bag mixed with 4 liters of water yields 15.5 liters of mixed adhesive.
- Toxicity: MULTIFIX–STA300 is non-toxic after cure and can be safely used in conjunction with potable water.
TYPICAL APPLICATIONS
- MULTIFIX – STA300 is the tile adhesive of choice for swimming pools and may be used with confidence in all wet areas including Shower Rooms, Institutional Kitchens, Bathrooms, and Decorative cladding.
- MULTIFIX – STA300 may be used to tile directly onto glazed tile surfaces and is especially recommended for non-porous or high density and glass mosaics where it may be used to both fix and grout.
National – Plaster of Paris
₨ 80.00 – ₨ 660.00 / Bag
Plaster of paris, quick-setting gypsum plaster consisting of a fine white powder (calcium sulfate hemihydrate), which hardens when moistened and allowed to dry. Known since ancient times, plaster of paris is so called because of its preparation from the abundant gypsum found near Paris. It is commonly used to precast and hold parts of ornamental plasterwork placed on ceilings and cornices. Plaster of paris is also used as a building material for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements.
- Benefit: Adjustable to Fit in Any Size
- Material: Plaster of Paris
- Usage: Suitable for all types of construction
- Unit Cost: Available Per Bag
Sea Star Grouting Sanded
/ Kg
PRE-MIXED POLYMER MODIFIED, WATER RESISTANT CEMENT BASED SANDED GROUT SUITABLE FOR WIDER JOINTS.
SEA STAR TILE GROUT (SANDED) is a special type of grout that has small particles of silica sand, polymers & binders in it to make it more stronger for wider joints.
USAGE / ADVANTAGES
-
CEMENT BASED SANDED GROUT FOR JOINTS 3MM & ABOVE
-
ENSURE PROPER ADHESION TO YOUR TIL
-
NON SHRINK IN WIDER GAPS / JOINTS
Sea Star Crack Filler
₨ 370.00
FLEXIBLE MATERIAL FOR WALL CRACKS & REPAIR
SEA STAR CRACK FILLER IS A POLYMER BASED REPAIR MATERIAL DESIGNED TO FILL AND SEAL CRACKS
USE TO FILL AND SEAL CRACKS IN PLASTERED SURFACES. POWDER WHEN MIX WITH WATER FORMS A CREAMY CONSISTENT PASTE WHICH IS EASY TO USE.
- MIX 1KG POWDER WITH APPROX *250ML WATER TO OBTAIN CRAMY CONSISTENT PASTE.
- * AMOUNT OF WATER CAN BE ADJUSTED AT JOBSITE DEPENDING ON THE WORKABILITY.
